FLENDER K.A Series, Operating Instructions Manual

Page: 53 / 128

Procedure
To unpack and use the gear unit, proceed as follows:
1. Remove packaging and transport devices in accordance with regulations.
2. Perform a visual inspection for damage and accumulations of dirt.
3. Immediately report any damaged and/or missing parts to Customer Services (Page 105).
4. Dispose of packaging material and transport devices in accordance with regulations.
5.3 Gear unit mounting
5.3.1 Foundation
Properties of the foundation
The foundation must have the following properties:
● Stability
● Designed for torsional rigidity
● Reaction forces from the gear unit must be braced
Requirements of the foundation
The foundation must meet the following requirements:
● Construct the foundation in such a way that it does not generate any resonance vibrations
and that it is isolated against the transmission of vibrations from adjacent foundations.
● Design the foundation according to the relevant weight and torque, taking into account the
forces acting on the gear unit.
● Align the foundation carefully with the equipment installed on the input and output sides of
the gear unit.
● Take into account any elastic deformation that may be caused by operating forces.
● Install lateral stops to prevent displacement if external forces are acting on the gear unit.
Mounting
5.3 Gear unit mounting
REDUREX Gear unit 5200en
Operating Instructions 03/2019
53