FLENDER K.A Series, Operating Instructions Manual

Page: 62 / 128

10.Tighten the hexagon nuts to their end stops using a suitable tool.
11.Document the tensioning pressures and preload forces, and archive this report together
with these instructions.
CAUTION
Incorrect use of the preload tool
Incorrectly using the preload tool can result in injury.
To ensure correct handling and adjustment of the preload tool, you must carefully comply with
the instructions provided in the manufacturers operating instructions for the preload tool.
NOTICE
Inadequate concrete hardness and strength
Damage caused by inadequate stability of the gear unit as a result of inadequate concrete
hardness and strength is possible.
The fine-grout concrete must be allowed to harden for at least 28 days before tensioning the
anchor bolts.
5.3.2.2 Mounting the gear unit swing base
NOTICE
Damage to the gear unit due to incorrect attachment of the gear unit swing base
The gear unit can be damaged by incorrectly mounting the gear unit swing base.
Mount the gear unit swing base in such a way that it is free of mechanical stress to avoid any
distortion.
Further information
You will find further information on the position of the gear unit swing base in the dimension
drawing, which is part of the overall documentation of the gear unit.
5.3.2.3 Mounting the torque arm for the gear unit housing
NOTICE
Damage to the gear unit due to incorrect attachment of the torque arm
Incorrect attachment of the torque arm could cause damage to the gear unit.
Mount the torque arm in such a way that it is free of mechanical stress.
Mounting
5.3 Gear unit mounting
REDUREX Gear unit 5200en
62
Operating Instructions 03/2019