Flavor Burst FB 80S-08, Manual

Page: 50 / 76

49
3. Thoroughly clean and dry the face of
the freezer where the Bracket base will
be attached. (See Figure 108.)
Figure 108
4. Remove the protective tape from the
adhesive pad. Attach the Keypad
bracket assembly to the desired
mounting area. Ensure there is enough
room between the Keypad assembly
and the freezer face to slide the Keypad
off and on the Bracket for cleaning.
(See Figure 109.)
Figure 109
5. Fully insert the Keypad stereo plug
into the Spigot Switch jack and ensure
that the connection is fully engaged.
(See Figure 110.)
Figure 110
6. Adjust the angle of the Keypad by
loosening the bottom hand knob of the
bracket and swinging the keypad
upward. The Keypad hinges on the
upper hand knob. Secure the Bracket
by tightening the hand knobs. (See
Figure 111.)
Figure 111
Syrup Line Unit Connection
The syrup lines attached at the lower
back of the cabinet connect the 8 bags
of syrup to the Blending Assembly, with
the 9
th
tube connecting the Sanitizer
Tank to the Blending Assembly.
1. Locate the 9-Tube Lead at the back
of the cabinet. Remove the dust cap
and slide the coupler casing toward the
unit to expose the lead line coupler.
(See Figure 112.)
Figure 112