39
4. Place the 9-Tube Assembly in a
container to catch the sanitizer solution
during the Rotor Flush function. (See
Figure 81.)
Figure 81
5. Tilting the Blending Head downward,
brush and clean all exposed surfaces
and openings of the Blending Head with
detergent water, then rinse thoroughly.
Use a small brush to clean any syrup
from the syrup orifices. (See Figure 82.)
Figure 82
NOTE:
DO NOT EXPOSE THE DRIVE
MOTOR TO MOISTURE.
6. Place only the Blending Head portion
of the Assembly in a container of
detergent water. Keep the Drive Motor
upright and just above the water line.
Press the ROTOR FLUSH key to clean
the blending auger inside the Blending
Head. (See Figure 83.)
Figure 83
7. Place only the Blending Head portion
in an approved sanitizer solution,
keeping the Drive Motor above the
water line. Press ROTOR FLUSH to
sanitize the enclosed auger. Allow the
Blending Head to soak for at least 1
minute. (See Figure 84.)
Figure 84
8. Remove the Assembly and the o-ring
from the sanitizer and place them on the
sanitary tray to dry. (See Figure 85.)
Figure 85
Summary of Contents for FB 80S-08
