Flavor Burst FB 80S-08, Manual

Page: 34 / 76

33
16. Once the Pump Flush process has
completed, disconnect the Pump Flush
Adapter from the Syrup Bag Connector.
(See Figure 53.)
Figure 53
17. Repeat Steps 8 - 16 until all of the
Connectors and bag fitments have been
sanitized and the syrup lines have been
flushed, and then return the Pump Flush
Adapter to its place under #8 syrup tray.
Phase 3: Reassembly
18. Reconnect each syrup line and bag
of syrup by pressing the Connector onto
the syrup bag fitment. (See Figure 54.)
Figure 54
19. Remove the Syrup Line Manifold,
the Duckbill Check Valve, and Coupler
Body from the sanitizer solution and
place on a sanitary tray to air dry. (See
Figure 55.)
Figure 55
20. Install the Duckbill Check Valve into
the Syrup Line Manifold and the Syrup
Line Manifold into the Coupler Body.
(See Figure 56.)
Figure 56
21. Remove the end of the 9-Tube
Assembly from the container. Using a
spray bottle of approved sanitizer
solution, spray end of the assembly and
allow it to sanitize for at least 1 minute.
(See Figure 57.)
Figure 57