25
5. Lift the Suspension Bracket with the Injector
Assembly from the freezer door knob. (See
Figure 26.)
26052
Figure 26
Disassembling the Injector Assembly
1. Rotate the Drive Motor to unlock and
remove the Drive Motor from the Drive
Assembly Gear Box. (See Figure 27.)
26030
Figure 27
2. Slide the Drive Motor onto the Accessory
Hanging Bracket. (See Figure 28.)
26183
Figure 28
3. Rotate the Injector Head to unlock it from
the Gear Box. (See Figure 29.)
26031
Figure 29
4. Remove the Gear Cartridge from the Gear
Box. (See Figure 30.)
Figure 30
Sanitizing the Injector System
1. Mix approved detergent with warm water
according to manufacturer’s instructions.
Also prepare approved sanitizer solution
according to manufacturer’s instructions.
2. Place the Drive Assembly Gear Box in
warm water and soak for at least 5 minutes.
Proceed with Steps 3 and 4 in the
meantime. (See Figure 31.)
Figure 31
Summary of Contents for FB 80D Series
