Flavor Burst FB 80D Series, Manual

Page: 2 / 81

1
INTRODUCTION
Congratulations on your purchase of an
FB 80D series flavoring system! As a food and
beverage provider, your customers are your
greatest asset. Your primary concern must be
the health and welfare of your customers. This
manual provides everyday operating guidelines
and procedures. Special functions have been
incorporated into the equipment to provide
simple and effective cleaning and sanitizing of
your unit. We urge you to follow these
instructions carefully and maintain strict sanitary
practices in your daily operating routine.
The FB 80D series system is an add-on to a
soft serve freezer designed to inject
concentrated flavorings throughout soft serve
product as it is dispensed. To dispense a
flavored product, the operator first selects the
flavor(s) from the system keypad. The draw-
handle must then be moved into the open
position while depressing the lever on the
spigot switch in a smooth continuous motion to
activate the FB 80D system and dispense
flavored product. Returning the draw-handle to
a closed position and releasing the draw handle
switch will stop product flow and the FB 80D
system.
Flavor Burst
®
syrup is stored within the
equipment cabinet in 1 gallon disposable bags.
Proper syrup injection rate is maintained by
adjusting the flavor level on the system keypad.
Components of the FB 80D system should be
cleaned daily to ensure the highest standard of
sanitation. When your equipment is delivered
or if it has been unused for more than 24 hours,
follow the DAILY OPENING PROCEDURES.
Always follow these safety precautions when
operating the Flavor Burst
®
system:
DO NOT operate the system without
reading this operator’s manual. Failure to follow
this instruction may result in equipment
damage, poor system performance, health
hazards, or personal injury.
DO NOT operate the system unless it is
properly grounded. Failure to follow this
instruction may result in electrocution.
DO NOT operate the system with larger
fuses than specified on the system data label.
Failure to follow this instruction may result in
electrocution or damage to the machine.
Consult your electrician.
DO NOT put objects or fingers in the
door spout. Failure to follow this instruction may
result in contaminated product or personal
injury from blade contact.
The FB 80D cabinet system must be
placed on a level surface capable of supporting
at least 220 lbs of weight. Failure to comply
may result in personal injury or equipment
damage.
SAFETY PRECAUTIONS