flamco MeiTronic W10, User Manual

Page: 10 / 232

10 User Manual
EN
GRAPHIC LCD DISPLAY
On the LCD display we can look up all the important data for the controller operation.
DESCRIPTION AND PRESENTATION OF THE BASIC SCREEN
Review of temperatures, protection
functions and other data.
Heating circuit
Operation
mode
User functions
Room unit
Review of measured temperatures
Status of the controller’s control
outputs
Time and
date
Messages and
warnings
REVIEW OF DATA ON THE SCREEN:
Operation mode and user functions appear separately for each circuit on the upper
third of the screen. To switch between heating circuits and the screen with the
hydraulic scheme review use the button.
Temperatures, active outputs, protection functions and other data appear in the
middle section of the screen. To review temperatures and other data, use buttons
and . The number of sensors and other data displayed on the screen
depends on the selected hydraulic scheme and controller settings.
If you wish to retrieve the desired data after using the keyboard, look for the
data with buttons and , then confirm it by pressing the
button for 2 seconds.
If you press the button for 2 seconds, the temperature review will change
from a single line review into a double line review or vice versa. In the two-line
temperature review, the measured temperature appears in the first line, and
the desired or the calculated temperature appears in the second line.