Lit. No. 44224, Rev. 14
41
August 15, 2011
OPERATING YOUR SNOWPLOW
Function Time-Outs
All control functions, except LOWER/FLOAT, time
out (stop) automatically after a period of time. This
is to limit the amount of electrical energy required
from the vehicle.
NOTE: If control function times out before
desired blade movement is complete, release
button and press again.
RAISE
LOWER
R
L
ON/OFF
FLOAT
1
4
3
2
Power Indicator
Light (red)
ON/OFF Button
(Emergency Stop)
FLOAT Light
(green)
HT Series™ Fish-Stik
®
HAND-HELD CONTROL
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
2. Press the ON/OFF button on the control. The
power indicator light glows red, indicating the
control is ON. The power indicator light glows
red whenever the control and the vehicle
ignition switch are both ON and the electrical
connections to the snowplow are completed.
The ON/OFF button operates as an
emergency stop if required.
WARNING
To prevent accidental movement of the
blade, always push the ON/OFF button
to switch the control OFF whenever the
snowplow is not in use. The power indicator
light will turn OFF.
Summary of Contents for Minute Mount 2 system
Page 3: ......
Page 111: ...Lit No 44224 Rev 14 112 August 15 2011 NOTES ...
