General operation
Seite/Page 144 - Kaptitel/Chapter 13: General operation
14.7.16
Fig. 13.4.6-1: Set-up menu
To activate the autostart function, select the item
"Autostart" in the set-up menu using the cursor buttons
and confirm the selection with the Start/Stop button.
Fig. 13.4.6-2: "Autostart" sub-menu
In the "Autostart" sub-menu, you can select between the
options "Enable" and "Disable" using the cursor
buttons:
To activate the autostart function, select "Enable" and again
confirm your selection with the Start/Stop button.
To deactivate the function, use the menu item "Disable".
The Panda iControl will then confirm your input:
Fig. 13.4.6-3: Message "Autostart enabled" after confirming the
selection
Message "Autostart enabled" after confirming the
selection
Fig. 13.4.6-4: Message "Autostart disabled" after confirming the
selection
Message "Autostart disabled" after confirming the
selection
Fig. 13.4.6-5: Selection is saved to the EEPROM
The activation/deactivation of the autostart function is
then saved to the EEPROM of the control panel.
