Inverter Panda PMGi
14.7.16
Kapitel/Chapter 11: Inverter Panda PMGi - Seite/Page 118
11.11.2.3 Connection to a system with isolation control at PMGi with PEN jumper
For the use of the PMGi with an isolation controlled grid, the external PE-N Bridge must be disconnected. PEN
jumper open.
11.11.2.4 Connection to a system with isolation control at PMGi without PEN jumper
For the use of the PMGi with an isolation controlled grid, the internal PE-N Bridge must be disconnected.
A manual for this modification can be downloaded under:
http://www.fischerpanda.de/images/gensets/M_AC_50_INV_PMS_8000i/operatormanual/PMGi/
Modification_PMGi_isolation_control.eng.pdf
11.12Technical Data
11.12.1 General Data
PMGi is part of the Panda i-series generator. Its not allowed to be used with other generators or applications.
11.12.2 Generator Specification
Storage temperature
PMGi
-20 °C to +55 °C
Working temperature
PMGi
Minimum: -20 °C
Maximum: +40 °C
Maximal internal temperature of the PMGi:
+60 °C
PMG Generator out
3 phase
Voltage Phase
minimum 250 V AC
Maximum 550 V AC
Frequency
minimum 250 Hz
Maximum 650 Hz