34
The probe end cap carries a removable flexible conduit fitting to enable probe replacement without
wiring. The 2 hexagonal caps visible on the probe rear face are there to cover the calibration gas port
and the sample gas port. The latter is merely a tube which passes directly into the flue to enable gas
samples to be drawn or flue temperatures to be taken using other instrumentation. Both ports must
be kept sealed during normal operation for safety and accurate performance.
PART A
PART B
FLUE WALL
MOUNTING
PLATE
BE220069
FLUE APERTURE
COVER BE220059
GASKET BE220060
IN 2 POS'NS.
PROBE MOUNT SYSTEM - FLAT WALL FLUE.
PROBE MOUNT SYSTEM - CYLINDRICAL
VIEW OF MOUNTING PLATE
WITH COVER REMOVED.
M6 PROBE
MOUNT HOLES
DIRECTION OF
FLUE GAS FLOW
Ø M6x25 ST.STL.
SCREW - TAP
FLUE WALL IN 6
POS'NS ON 80
(3.15") PCD TO
SUIT.
C
L
FLUE WALL
COVER BE220059
FLUE APERTURE
GASKET BE220060
MATERIAL: MILD STEEL
FINISH: ZINC PLATE.
DIRECTION OF
FLUE GAS FLOW
VIEW OF MOUNTING PLATE
WITH COVER
REMOVED.
L
C
MOUNT HOLES
M6 PROBE
3 (1/8") FILLET WELD
ALL ROUND
20
(0.78")
WELD FLANGE
PROBE MOUNT
BE220345
30|
ALL DIMENSIONS IN MILLIMETRES
INCH EQUIVALENTS ARE IN ( )
OR FLAT WALL FLUE.
