Weatherproof procedures
35
Tools and materials to weatherproof connections
To make a weatherproof connection you need the following tools and materials:
•
Pliers
•
Utility knife
•
Vinyl electrical tape
Note:
Vinyl electrical tape between the cable assembly and the mastic tape
makes future changes easier than mastic tape put directly on the cable. Vinyl
electrical tape as a cover over the mastic tape prevents the mastic from melting
in hot weather.
•
Rubber splicing or mastic tape (also known as self-amalgamating, self-
sealing, self-fusing, non-vulcanized tape)
•
Pencil or wooden dowel for small clearances
•
Cleaning supplies (if necessary)
•
Laptop running HotView software
Making a weatherproof antenna connection
You need to put tape around the antenna connectors to make them
weatherproof. The next picture shows correct tape technique and a drip loop.
Summary of Contents for HotPort 5020
