Firetide HotPort 5020, Installation Manual

Page: 25 / 47

Outdoor node installation
17
Mount bracket
Hooks on mount plate
Node
c. Put the HotPort 5020 edge node in a safe place while you attach the
bracket to a pole or wall.
3. To a pole that you can install at a permanent outdoor site, attach these
items:
- Bracket for the node
- Antenna bracket
- (Optional) Other devices
4. Attach the antenna to the antenna bracket. Refer to the installation
procedures for the antenna.
5. Attach the node to the bracket so that when it is in its permanent location
the connectors point down, ports are on each side, and you can read the
“Firetide” name.
The installation is correct if the device does not move side to side easily, the
“Firetide” mark is oriented correctly, and the connectors are oriented to the
ground.