Outdoor node installation
25
5.
With the Phillips screwdriver tighten the four captive screws to secure the
enclosure to the bracket.
The installation is correct if the node does not easily move from side to side,
and the connectors are oriented to the ground.
Note:
If you need to, add other straps or a sling to increase durability of the
attachment to the pole.
Best practice:
Use a spray to prevent corrosion on the bracket and mount
hardware.
Weatherizing the connectors
The HotPort 5020-M node comes with a field-installable weatherized Ethernet
connector.
Correct weatherproofing includes:
•
Sealing all antenna connectors and antenna connector terminators
•
Installing the weatherized Ethernet connector
•
Using a spray to prevent corrosion on the bracket and mount hardware
For weatherizing procedures, see “Weatherproof procedures” on page 35.
Summary of Contents for HotPort 5020
