Firetide HotPort 5020, Installation Manual

Page: 39 / 47

Troubleshooting
31
Setting the country code on a new edge node
To set the country code on a new edge node:
1.
Put the node on a table.
2. Attach the Ethernet cable from the administrator computer to the node.
Note.
The administrator computer must have an IP address on the same subnet
as the node. If the node is new, the default IP address is 192.168.224.150.
3. Provide power to the 5020-E via the included PoE or a DC power source
that you have designed per datasheet specifications.
4. The power LED comes on. The node boots and is ready to use in one minute.
5. Attach the staging antennas.
6. Single-click to start the Quick Launch feature of HotView Pro, which opens
the server and client software at the same time.
7. Login with the correct user name and password. The default user name is
hv_admin; and the default password is firetide.
The system initializes.
8. Go to
Mesh > Add Mesh >
login with the default user name and password.
When you add the mesh, the system prompts you for the country code.