Firetide HotPort 5020, Installation Manual

Page: 40 / 47

Troubleshooting
32
9. Set the country code for the node to change the device from a low-power,
low range setting to a correct full-power operational mode.
Caution:
Make sure you configure the device for the correct country. If
you do not configure the country correctly, the device might operate in a
manner that is not legal or create problems with other wireless devices.
a. Select the country of operation from the drop-down list.
b. Click
Set Country Code Now
.
When you set the country code the system refreshes the mesh configuration
and gives all visible nodes the same country code. For a few minutes the
nodes might appear and disappear from the graphic mesh record in HotView
Pro.
c. Wait for three minutes for the system to finish the refresh.
!