Fike SHP 10-051, Product Manual

Page: 19 / 52

FIKE CORPORATION EQUIPMENT
UL S2203 SHP Product Manual Page 13 of 43
FM 0Z8A0.AY Manual P/N: 06-130 Rev. No: 3, 04/02
3.4 ANCILLARY DEVICES
The following table lists several ancillary devices that can be used in conjunction with the SHP panel to
provide increased system flexibility and performance. For detailed wiring instructions for each of these
devices refer to the appropriate product manual.
P/N Manual P/N Description Function
10-2256 06-159 Digital Alarm Communicator Complies with NFPA 72-Supervising Station
Fire Alarm System
10-1832 06-106 ARM-III (Agent Release Module) Provides primary means for Fike’s Clean
Agent suppression systems
10-107 –
10-110 06-019 Conventional Graphic Annunciator Provides graphic point annunciation for
detectors
• 10-2256 Digital Alarm Communicator/Transmitter (DACT)
The SHP panel is capable of communicating to a Central Station via
the DACT (optional). The DACT monitors the relay outputs of the
SHP. It is necessary to program the DACT with the 10-2257
programmer and 10-2258 cable or 10-2259 modem and 06-151
software.
• 10-1832 Agent Release Module (ARM III)
The SHP panel is capable of supporting up to 6 ARM’s on the single
Agent Release Output Circuit. The ARM is required for each Clean
Agent Suppressant Container. Refer to the ARM manual, 06-106 for
detailed instructions on the ARM.
•
10-107 – 10-110 Conventional Graphic Annunciator
Fike Graphic Annunciators provide a graphic display of the
protected area using LED’s to indicate the location of smoke
detectors.
firealarmresources.com