3.0 SYSTEM COMPONENTS
UL S2203
CyberCat 254/1016 Installation Manual
3-39
FM
P/N: 06-326
Rev 14, 09/2015
3.13 BATTERIES AND BATTERY ENCLOSURES
Batteries are required for alarm systems for maintaining emergency back-up power. Refer to Appendix A for
Battery Calculation form for determining required battery size for system.
3.13.1 18 AH BATTERY ASSEMBLY, P/N 10-2190-2
The 10-2190-2 battery assembly consists of two 18 AH
batteries with a wiring harness.
P/N 10-2192 Wiring assembly only for 7.2 AH and 18
AH batteries
P/N 10-2517 Wire Assembly with Battery EOL for use
if batteries give fault but load test good.
3.13.2 BATTERIES
P/N 02-3468
33 AH Battery, Requires 2 each
P/N 02-4206
75 AH Battery, Requires 2 each
3.13.3 BATTERY ENCLOSURES
Batteries larger than 18 AH will not fit inside the CyberCat
panel enclosure(s); therefore, one of the following battery
enclosures must be installed to house the batteries.
Interconnecting cables from the battery cabinet to the
CyberCat enclosure shall be in installed in conduit.
3.13.3.1 33AH BATTERY ENCLOSURE
(BATTERIES NOT INCLUDED)
P/N 10-2154-c (c =
R
ed or
B
lack)
The 33AH Battery Enclosure (See Exhibit 3-83) is a heavy
gauge metal enclosure designed to house two 33AH
batteries. Conduit knockouts are provided to provide entry
of battery wiring. The box lid is installed onto the back-box
using the 4 mounting screws provided.
Refer to Fike document 06-534, for more information.
3.13.3.2 75AH BATTERY ENCLOSURE
(BATTERIES NOT INCLUDED)
P/N 10-2236-c (c =
R
ed or
B
lack)
The 75AH Enclosure (See Exhibit 3-84) is a heavy gauge
metal enclosure designed to house two 75AH batteries.
Conduit knockouts are provided to provide entry of battery
wiring. The box lid is installed onto the back-box using the 4
mounting screws provided.
Refer to Fike document 06-535, for more information.
Exhibit 3-83: 33AH Battery Enclosure
Exhibit 3-84: 75AH Battery Enclosure
Exhibit 3-82: Sealed Batteries
Summary of Contents for CyberCat 1016
Page 99: ......
