3.0 SYSTEM COMPONENTS
UL S2203
CyberCat 254/1016 Installation Manual
3-33
FM
P/N: 06-326
Rev 14, 09/2015
3.9
REMOTE TESTING AND NOTIFICATION ACCESSORIES
The following accessories add functionality to the CyberCat detection system by allowing quick, convenient
inspections at eye level and effective audible and visual notification options.
3.9.1
REMOTE ANNUNCIATOR, P/N 02-3868
(System Sensor RA100Z)
The remote annunciator (See Exhibit 3-64) can be used with any of
the CyberCat detector bases, including the duct detector housing. It
is fully programmable from the detector head and can light different
flashes for different devices/states with up to 8 different priority rows.
It mounts directly to single gang electrical box with a minimum depth
of 2.5 inches or directly to a wall or ceiling. The annunciator’s red
LED can provide visual indication of an alarm condition.
3.9.2
REMOTE TEST STATION, P/N 02-3869
(System Sensor RTS151)
The remote test station (See Exhibit 3-65) is designed to enable
testing of remotely mounted duct smoke detectors from a convenient
location. It mounts directly to single gang electrical box with a
minimum depth of 2.5 inches or directly to a wall or ceiling. The
annunciator is equipped with a red LED that provides visual
indication of an alarm condition and a magnetic test function that
allows remote testing of the connected detector.
Special programming is required on the associated DUCT detector
when using this remote test station. See programming manual.
3.9.3
REMOTE TEST STATION WITH KEY, P/N 02-4998
(System Sensor RTS151KEY)
The remote test station with key (See Exhibit 3-66) is designed to
enable testing of remotely mounted duct smoke detectors from a
convenient location. It mounts directly to single gang electrical box
with a minimum depth of 2.5 inches or directly to a wall or ceiling.
The annunciator is equipped with a red LED that provides visual
indication of an alarm condition and a keyed test function that allows
remote testing of the connected detector.
Special programming required on the associated DUCT detector
when using this remote test station. See programming manual.
Exhibit 3-64: Remote Annunciator
Exhibit 3-65: Remote Test Station
Exhibit 3-66: Remote Test
Station with Key
Summary of Contents for CyberCat 1016
Page 99: ......
