HIGH LEVEL INTERFACE
UL S3217
P/N 06-158
3
FM 3020297
Rev 5, 02/2015
1.0
ABOUT THIS MANUAL
This manual is intended to be a reference for the installation and operation of the VESDA High Level Interface
(HLI) Module. The information contained in this manual must be utilized by the factory trained Fike distributor
in order to properly install and test the device to ensure proper operation. This manual is not designed to be
a full Operations Manual for the end user.
Before you refer to any section in this manual, and before you attempt to install or use, be sure to read the
important safety notices in Section 1.6.
This manual is divided into sections for easy reference. The first-time installer and/or user should thoroughly
read and understand the instructions contained within this manual before using this device. These
instructions must be followed to avoid possible damage or adverse operating conditions caused by improper
installation, wiring and/or programming.
1.1 DOCUMENT
HISTORY
Document Title
: VESDA Network Interface – Product Manual
Document Reorder Number
: 06-158
Revision
Section
Date
Reason for Change
0
All Sections
10/2003
Initial Release
1
All Sections
09/2004 Updates to Firmware & Manual Format Corrections
2
All Sections
03/2007 Include Operation with CyberCat and Cheetah Xi
3 All
Sections
10/2008
Changed the number of VESDA units that can be
connected to HLI if used for primary detection to 10
maximum
4 All
Sections
04/2010
Changed the number of VESDA units that can be
connected to HLI if used for primary detection to 40
maximum
5
Section 2.3
02/2015 Updated HLI current draw.
1.2 PRODUCT
SUPPORT
If you have a question or encounter a problem not covered in this manual, you should first try to contact the
distributor that installed the protection system. Fike has a worldwide distribution network. Each distributor
sells, installs, and services Fike equipment. Look on the inside of the door, left side, there should be a sticker
with an indication of the distributor who sold the system. If you can not locate the distributor, please call Fike
Customer Service for locating your nearest distributor, or go to our web-site at
www.fike.com
. If you are
unable to contact your installing distributor or you simply do not know who installed the system you can
contact Fike Product Support at (800) 979-FIKE (3453), Option 21 Monday through Friday,
8:00 a.m. to 4:30 p.m. CST.
