HIGH LEVEL INTERFACE
UL S3217
P/N 06-158
39
FM 3020297
Rev 5, 02/2015
INVALID V-ZONE CLEAR
Fault Clear.
None.
ISOLATE ACTIVE
Intelligently interfaced VESDA
detector has been isolated.
Determine where ISOLATE was performed
(Display or software). Press ISOLATE again
to re-enable.
ISOLATE RESTORE
Older Firmware
None.
PALARM1 ACTIVE ----
Addressable sensor, input, or
VESDA is above the PreAlarm 1
threshold. --- will show analog
data.
Locate device and determine cause for
elevated obscuration or activation.
PALARM1 RESTORE ----
Device obscuration has returned
below the PreAlarm 1 threshold.
None.
PRE-ALARM1 PRESENT
This zone has an active PreAlarm
1 state.
Locate the source of the PreAlarm 1 using
previous events.
PRE-ALARM1 RESTORED
The PreAlarm 1 level has cleared
in the zone.
None.
PALARM2 ACTIVE -----
Addressable sensor, input, or
VESDA is above the PreAlarm 2
threshold. --- will show analog
data.
Locate device and determine cause for
elevated obscuration or activation.
PALARM2 RESTORE ---
Device obscuration has returned
below the PreAlarm 2 threshold.
None.
VESDA COMMUN ERROR
Intelligently interfaced VESDA
High Level Interface (HLI) has
become disconnected.
Check the HLI. Is power present? Are
cables properly connected? Is RS232 Cable
connected to Cheetah P3 Jack 3? Make sure
the cable is connected and the HLI is
powered.
VESDA COMMUN
RESTORE
Intelligently interfaced VESDA
High Level Interface (HLI) has
become re-connected.
None.
VESDA FAULT ID = ---
VESDA detector
TROUBLESHOOTING fault ID.
Use VESDA manual section Troubleshooting
for fault assistance.
VESDA FAULT CLEAR ID =
---
This VESDA fault has cleared.
None.
VESDA FAULT: AIRFLOW
VESDA Detector Trouble.
Corresponds with the VESDA
Display fault LED.
Most VESDA faults will also be followed by a
Fault ID. The VESDA manual provides
troubleshooting for the specific Fault ID.
VESDA CLEAR: AIRFLOW Fault Clear.
None.
VESDA FAULT: FILTER
VESDA Detector Trouble.
Corresponds with the VESDA
Display fault LED.
Most VESDA faults will also be followed by a
Fault ID. The VESDA manual provides
troubleshooting for the specific Fault ID.
VESDA CLEAR: FILTER
Fault Clear.
None.
VESDA FAULT: ISOLATE
VESDA Detector Trouble.
Corresponds with the VESDA
Display fault LED.
Most VESDA faults will also be followed by a
Fault ID. The VESDA manual provides
troubleshooting for the specific Fault ID.
VESDA CLEAR: ISOLATE Fault Clear.
None.
VESDA FAULT: MAJOR
VESDA Detector Trouble.
Corresponds with the VESDA
Display fault LED.
Most VESDA faults will also be followed by a
Fault ID. The VESDA manual provides
troubleshooting for the specific Fault ID.
VESDA CLEAR: MAJOR
Fault Clear.
None.
