manualshive.com logo in svg

Fiery AR-PE1, Installation And Service Manual

Share
Download
Fiery AR-PE1 Installation And Service Manual Download Page 59

4-13

4

Removing and replacing boards

Removing and replacing boards

This section includes procedures for removing and replacing the following boards:

• AGP video board

• Copier interface board

• IX UIB board

• Ethernet board

• Motherboard

For information on installing option boards, see the separate installation instructions 
provided with that board.

AGP video board

The AGP (Accelerated Graphics Port) video board installed in the 
Print Controller X4(AR-PE1) provides connectivity to an optional monitor, which 
connects to the 15-pin D connector (occupying slot 1 on the back of the 
Print Controller X4(AR-PE1) tray) on the AGP board. The other connector on the 
board connects to motherboard connector AGP1.

F

IGURE

 4-10

AGP video board layout

To motherboard connector AGP1

15-pin D connector

(optional monitor cable)

Summary of Contents for AR-PE1





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands