Festo VABA-10S6-X Series, Manual

Page: 35 / 196

1. Overview and sub−bases for CPX I/O modules
1−17
Festo P.BE−CPX−EA−EN en 0804g
Sub−bases CPX−AB−8−M8−3POL and −4POL
P l ease n o te
In order that the completely fitted modules with sub−bases
CPX−AB−8−M8−3POL and −4POL comply with protection
class IP65/IP67:
·
use plugs and cables from the Festo range for con
necting the sensors and actuators (see section B.3).
·
Tighten the union nuts of the plugs at first by hand.
·
Seal unused sockets with protective caps type ISK−M8
(Accessories).
Sub−base CPX−AB−8−KL−4POL
The completely fitted sub−base CPX−AB−8−KL−4POL complies
with protection class IP20.
Speci f icati o ns of the cab l e te r mina l s
Cable cross−sectional area: 0.08
Ū
1.5 mm
2
Max. current: see section A.1
Insulation removed: 5
Ū
6 mm
Pe r mitted c o ppe r c o nduct or s
Single wire, multi−wire, fine wire,
also with tin−plated individual cores
Fine wire strands compressed
Fine wire with core end sleeves
(sealed against gas, crimped on)
*)
Fine wire with pin cable socket
(sealed against gas, crimped on)
*)
*)
If necessary, use next smaller cross−sectional area.