Festo VABA-10S6-X Series, Manual

Page: 46 / 196

1. Overview and sub−bases for CPX I/O modules
1−28
Festo P.BE−CPX−EA−EN en 0804g
1.3.2 Fitting the screening/shield plates
A screening plate type CPX−AB−S−4−12 can be fitted on
sub−bases CPX−AB−4−M12x5−5POL and CPX−AB−4−M12−8POL.
The sub−base must be removed before the terminal is fitted
or dismantled.
Fitting Fit the screening plate as follows (see Fig.1/9):
1. Dismantle the sub−base (see section 1.3.1).
2. Snap the spring clips of the screening/shield plate from
above into the appropriate recesses on the dismantled
sub−base.
3. Fit the sub−base.
Instructions on earthing the screening/shield plate can be
found in section 1.2.3.
Dismantling The screening/shield plate must be removed in the opposite
sequence to the fitting procedure.