Festo VABA-10S6-X Series, Manual

Page: 146 / 196

5. CPX pneumatic interfaces
5−10
Festo P.BE−CPX−EA−E N en 0804g
C a ut i o n
Inappropriate handling can result in damage to the
modules.
·
Do not touch the electrical contacts of the modules.
·
Observe the handling specifications for electrostatically
sensitive components.
·
Discharge yourself before installing or removing
sub−assemblies to protect the sub−assemblies from
static discharges.
Pl e a se n o te
Handle all modules and components of the CPX terminal
with great care. Note especially the following:
·
Screws must be fitted accurately (otherwise threads will
be damaged).
Screws must be fastened at first only by hand. Screws
must be placed so that the self−cutting threads can be
used.
·
The specified torques must be observed.
·
Screw connections must be fitted free of offset and
mechanical tension.
·
Check the seals for damage (IP65).
·
Connecting surfaces must be clean (to ensure sealing
effect, avoid leakage and contact faults).
The screw connection between the cover and the lower
part of the CPA pneumatic interface is designed for at least
10 fitting/removal cycles.