Festo VABA-10S6-X Series, Manual, Page: 150 / 196

5. CPX pneumatic interfaces
5−14
Festo P.BE−CPX−EA−E N en 0804g
5.4 I n st a ll a t i o n
Instructions on installing the pneumatic components can be
found in the relevant pneumatics manual.
Instructions on installing the electric components can be
found in the CPX system manual.
Instructions on addressing the valve solenoid coils as well as
further instructions on installing the electric components can
be found in the relevant bus node manual.
Power supply
The 24 V supply for the valves is provided via the load voltage
for the valves of the CPX terminal (V
VAL
).
The power supply for the electronics of the pneumatic
interfaces is provided via the operating voltage supply for the
electronics/sensors (V
EL/SEN
).
Address assignment within the pneumatic modules
Instructions on assigning the addresses to the individual
valve solenoid coils with Midi/Maxi or CPA pneumatics can be
found in the appropriate pneumatics manual.
Instructions on assigning the addresses to the individual
valve solenoid coils with MPA pneumatic modules can be
found in the manual P.BE−MPA−ELECTRONIC−...
Protection class
When completely fitted, the pneumatic interfaces with the
valve terminal pneumatics comply with protection class IP65
(see section A.6).