Festo VABA-10S6-X Series, Manual

Page: 172 / 196

A. Technical appendix
A−12
Festo P.BE−CPX−EA−E N en 0804g
A.6 T e c h ni c a l s p e c i f i c a t i o n s of t h e p n eu m a t i c in te rf a c es
T e c h ni c a l s p e c i f i c a t i o n s C P X −GP−03−4.0 C P X −GP− C PA−...
General technical specifications of the
CPXterminal see CPX system manual
Protection class as per EN 60529 IP65, in fitted state
Operating voltage supply for electronics/
sensors (V
EL/SEN
)
Nominal voltage
Internal current consumption at 24 V
(internal electronics)
24 V DC ±25 %
typ. 15 mA
Load voltage supply for valves (V
VAL
)
Nominal voltage
Internal current consumption at 24 V
(internal electronics, without valves)
Diagnostic message undervoltage V
VAL
(monitoring V
VAL
, load voltage outside
function range)
24 V DC ±10 %
typ. 30 mA
Ţ
21.6
Ū
21.5 V
DC 24 V +10/−15 %
typ. 30 mA
Ţ
19.8
Ū
19.6 V
Digital outputs (valve solenoid coils)
Rated load voltage
Intended for connecting to pneumatics
Short circuit protection at valve output
Monitoring wire fracture (open load)
max. 26 outputs
V
VAL
Midi/Maxi (type 03)
yes (electronic),
resp. threshold
,
1.0 A
no
max. 22 outputs
V
VAL
CPA (type 12)
yes (electronic),
resp. threshold
,
1.0 A
can be parameterized
Isolation tested with 500 V DC
Electrical isolation...
between the channels (valve solenoid coils)
between the operating voltage supply for
the electronics/sensors (V
EL/SEN
) and the
load voltage for the valves (V
VAL
)
none
with power supply via manifold sub−base type:
CPX−GE−EV−S:
none
CPX−GE−EV−S−7/8− 5 POL: yes
CPX−GE−EV−V...: yes
Module code [type code] (CPX−specific)
Module identification (Handheld) 67
TYPE3 66
CPA10/14