Festo VABA-10S6-X Series, Manual

Page: 145 / 196

5. CPX pneumatic interfaces
5−9
Festo P.BE−CPX−EA−E N en 0804g
5.3 S ett in g s for c o n f i g u r in g t h e p n eu m a t i c s
Midi/Maxi, CPA or
VTSApneumatics Settings for configuring the pneumatics are only necessary
with the pneumatic interfaces for Midi/Maxi, CPA and
VTSApneumatics (ISO).
No settings are required for MPA pneumatics.
C a ut i o n
After conversion or extension of the Midi/Maxi, CPA or
VTSA pneumatics, the number of output addresses
occupied by the pneumatics must be set on a DIL switch
on the pneumatic interface.
CPX terminals can be fitted with various valves and electric
modules in accordance with the customer’s wishes.
The size of the valve address range on Midi/Max, CPA or
VTSA pneumatics is not modified when the valves are ex
tended or converted, providing sufficient address space has
already been reserved for the extension. The valve address
range must be set with a DIL switch. The DIL switch is situ
ated under the transparent cover on the pneumatic interface.
W a r nin g
Sudden unexpected movement of the connected actuators
and uncontrolled movements of loose tubing can cause
injury to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply
the operating and load voltage supplies.