Festo SPC200 Series, Manual

Page: 20 / 107

With the field bus module, 10 bits are available for se-
lecting the NC record number in record select mode.
The maximum permitted number of NC records (up to
1000) of the determined starting programs can there-
fore be accessed.
When a field bus module is used:
•
the address ranges I0.0 ... I0.9 and Q0.0 ... Q0.7 re-
main unused. These address ranges, which serve
without field bus module for controlling the SPC200,
are not available.
•
maximum 3 I/O modules can be inserted. These pro-
vide exclusively freely programmable I/Os in the
operating mode start/stop.
The address assignment when a field bus module is
used is shown in the table below.
Module Maximum address range
-
1)
I0.0 ...I0.9
1)
Q0.0 ... Q0.7
1)
I/O modules on first
axis interface string I1.0 ... I1.15 Q1.0 ... Q1.15
First I/O module I2.0 ... I2.9 Q2.0 ... Q2.7
I/O modules on second
axis interface string I3.0 ... I3.15 Q3.0 ... Q3.15
Second I/O module I4.0 ... I4.9 Q4.0 ... Q4.7
Third I/O module I5.0 ... I5.9 Q5.0 ... Q5.7
Field bus module I10.0 ... I13.15 Q10.0 ... Q13.15
1) Address range is not available if a field bus module
is used
1. System summary
SPC200-COM-PDP 9904NH
1-9