Festo SOPA-C series, Operating Instructions Manual, Page: 23 / 44

SOPA-...
Festo – SOPA-... – 2017-09b English 23
5 Commissioning
5.1 Symbols on the display
Display Symbol Description
A B C
SP HY
min max
NO NC
Delay
TeachIn
Option
Lock
msec
A B C Display for binary signals set/not set
(in the example A, B: set – C: not set)
Threshold value comparator
Window comparator
[SP] Switching point
[SP] [min] Lower switching point
[SP] [max] Upper switching point
[HY] Hysteresis
[NO] Switching characteristic of normally open contact
[NC] Switching characteristic of normally closed contact
[min]/[max] Minimum/maximum input value (In A/B/C)
[TeachIn] TeachIn mode active
[Option] Options for spurious pulse suppression (Off, 1, 2)
[LOCK] Security code active
(block to prevent unauthorised parameterisation)
Special menu (SPEC) is active
[P2-] Allocation of the switching output for Pin 2 with the binary
signal In B or In C
[di.] Activation/deactivation of the numerical display
[Delay] Switch-off delay for the numerical display
[ – – – – ] Numerical display is switched off
[SUP.P] Error message: Supply pressure is outside the range of values
Graphical display of the current distance-correlated value
forIn A and In B in relation to the set switching point
(
è
Chapter 5.2).
– The bar graph for In A is always active.
– The bar graph for In B is only active if the binary signal
OutB is assigned to the switching output at Pin 2.
Tab. 12 Symbols on the display