SOPA-...
Festo – SOPA-... – 2017-09b English
19
Plate mounting:
1. Create 4 x M5 threaded holes.
Hole patterns and dimensions
è
Fig. 23.
2. Tighten the screws with a tightening torque
of
0.8 Nm. Use washers.
Fig. 11
Plate mounting
Wall mounting:
1. Mount 2 adapter plates (e.g. 2 x M3).
Holepatterns and dimensions
è
Fig. 23.
2. Hang the SOPA on the mounting plates and
press it until the mounting tabs engage in
place.
Fig. 12
Wall mounting
Attaching the sensor module without a control module
Use a suitable pressure regulator to guarantee the required supply pressure for all pneumatically
linked sensor modules (
è
Technical Data, Chapter 11).
1
2
The supply pressure can be fed from the left
and/or right-hand side.
1. Mount the threaded M7 fitting onto the supply
pressure connection
1
or
2
.
Max. thread length: 5.5 mm.
2. Seal the opposite connection with the M7
blanking plug.
Spanner size AF 3 mm, tighten by hand.
Fig. 13
Attaching sensor modules