Festo — EXCH — 2022-03b
Preparations for assembly
17
6.4.2
Mounting plates
The mounting plates are an alternative to the adjusting kits and are used to attach the planar surface
gantry.
NOTICE
The mounting plates are not adjustable.
• Some measures are required to align the planar surface gantry and maintain the limit values.
The distance dimension for the retaining screws is identical to that of the adjusting kits.
Re-ordering mounting plates
6.5
Mounting
6.5.1
Number of mounting kits
The required and pre-assembled number of mounting kits depends on the stroke of the X-axis.
Stroke of the X-axis
Number of mounting kits
Total
Per X-axis (number n)
£
899 mm
4
2
900 … 1799 mm
6
3
³
1800 mm
8
4
Tab. 5: Number of mounting kits
6.5.2
Mounting holes
• Note the mounting position of the planar surface gantry
• Note the number of mounting kits
Tab. 5 Number of mounting kits.
• Keep a clearance of at least 5 cm in extension of the X-axis for mounting access behind the end cap
of the toothed belt tensioner.
•
Prepare the threaded holes in the mounting surface.
