16
Festo — EXCH — 2022-03b
Preparations for assembly
Aligning and adjusting profiles
• Observe detailed descriptions for alignment:
7 Mounting (horizontal mounting position) or
8 Mounting (vertical mounting position)
1. On the adjusting kit that is to be adjusted:
Only loosen the socket head screw that is currently being adjusted. Do not loosen both screws of
the adjusting kit simultaneously.
2. Screw the adjusting bolt in or out (h = 6 … 11 mm).
Use an open-ended spanner with a thickness of
<
5 mm. Ensure that the screw-in depth of the
socket head screw is sufficient (with steel
³
8 mm).
3. Tighten the socket head screw. Tightening torque 24 Nm
Counterhold the adjusting bolt to maintain the alignment.
7
5
Fig. 8: Aligning and adjusting profiles
5
Adjusting bolt
7
Socket head screw
7
5
Fig. 9: Aligning and adjusting profiles
