Festo DGEA Series, Operating Instructions Manual

Page: 51 / 160

DGEA−...
Festo DGEA−... 0501a English
51
15 G ener a l te c hni ca l s pe c i f i ca tion s
As pe c t DGEA −18−... DGEA −25−... DGEA −40−...
Operating mode Cantilever operation (= yoke mode)
Permitted temperature range
Storage
Operating environment
0 ... +40 °C
−10 ... +60 °C
Mounting position As desired
End position cushioning/protection Integrated buffer for very slight cushioning energy
Protection class IP20
Feed rate constant 81 mm/rev 120 mm/rev
Max. permitted speed 3 m/s
Repetition accuracy as per DIN 230, part 2
R={− 3s, + 3s} ± 0.05 mm
Drive type Stepping motor, servo motor
(in some cases including gears or brake)
Toothed belt spacing 3 mm 5 mm
Max. perm. feed force of the toothed belt 230 N 400 N 1000 N
Tightening torques for the cover screws 5.3 Nm 9 Nm
Max. permitted dynamic loading of the
guideway:
Fy max, Fz max
Mx max
My max
Mz max
2000 N
19 Nm
94 Nm
65 Nm
3080 N
28 Nm
230 Nm
160 Nm
7300 N
133 Nm
665 Nm
460 Nm
Max. perm. driving torque at the drive shaft
(not for right−angle gear units) 3 Nm 5.2 Nm 19 Nm