Festo DGEA Series, Operating Instructions Manual

Page: 37 / 160

DGEA−...
Festo DGEA−... 0501a English
37
Fittin g e x tern a l acc e ss orie s
S
Use the grooves for fitting external acces
sories.
With size 18, the sliding blocks slide over a
recess into the relevant groove.
With sizes 25 and 40, the sliding blocks
will slide into the groove at any position
when tilted.
Selecting the motors:
S
Make sure that the DGEA−... is driven only with one of the following types of
motors. You will then operate a pair of devices which have been specially
matched to each other.
DGEA −... Motor witho u t g e a r s
without brake (...−AA)
with brake (...−AB)
G e a re d motor
without brake (...−GA)
with brake (...−GB)
Servo motor s 18 MTR−AC−55−3S−GA/GB
25 MTR−AC−70−3S−GA/GB
40 MTR−AC−100−5S−GA/GB
Steppin g motor s
18 MTR−ST−87−48S−AA/AB
25 MTR−ST−87−48S−AA/AB
40 MTR−ST−87−48S−GA/GB
DGEA −
Ū
− G ..−... (with ri g ht− a n g le g e a r u nit )
Servo motor s 18 MTR−AC−55−3S−AA/AB
25 MTR−AC−70−3S−AA/AB
40 MTR−AC−100−5S−AA/AB
Fig.15
If you are using gears at very low temperatures:
Ple as e note
S
Note that gears have an increased idling torque until the operating tempera
ture is reached.
Fig.14
j
18