Festo DGEA Series, Operating Instructions Manual, Page: 38 / 160

DGEA−...
Festo DGEA−... 0501a English
38
Fitting the motor (not for right−angle gear units):
The motor flange (one or two parts, screws
aG
and
aH
in Fig.17) is supplied
already mounted depending on your order. The coupling is then also mounted
fixed on the side of the axis.
With individual components (not for right−angle gear units):
S
Note the torques in accordance with Fig.16 and Fig.17.
S
Compare the shaft diameter [mm] of your combination with the specifica
tions in the following table:
MTR−... AC −55−... AC −70−... AC −100−... ST−87−...
j
e x t
* ) M
KS E
DGEA −18−... (8/11) (8/11) 30 2.9 Nm
DGEA −25−... (11/12) (11/11) 40
10.5 Nm
DGEA −40−... (15/20) 40 10.5 Nm
(15/24) 65 25 Nm
Example:
M
KSE
M
KSE
Ø
ext
Ø
Ø
6/12
Ø
ext
*) = Outer diameter of the coupling [mm]
Fig.16
Commission the motor and the controller (preliminary comparison) in accordance
with the operating instructions.