Festo Checkbox Identbox, Manual

Page: 37 / 158

2. Fitting and Installation
2-5
Festo P.BE-Checkbox-EN en 0103c
Fitting guides Integrate the conveyor unit in the material flow in order to
ensure a reliable supply of parts from the small parts con-
veyor onto the conveyor belt. Ensure also the transfer of parts
from the conveyor belt to the buffer zone (e.g. drop pipe,
slide, shaker) of the next machine by mechanical devies.
You can obtain mounting plates as accessories for fastening
mechanical supply or delivery guides to the conveyor unit.
Connecting the controller There are plug connectors on the side of the controller for
periphery devices, control and signal connections. Further
information on the individual connections can be found in the
chapters which follow.
1
2
3
4
5
6
1
Controller X4
2
Conveyor unit with camera (hybrid cable) X5
3
Mains cable
4
Diagnostic interface X1
5
Small parts conveyor X2
6
Buffer zone sensors X3
Fig. 2/1: Connections and interfaces of the controller