Festo Checkbox Identbox, Manual

Page: 112 / 158

7. Maintenance
7-4
Festo P.BE-Checkbox-EN en 0103c
Clean the following if it/they is/are dirty:
– the protective screen “Camera” between the camera and
the conveyor unit
– the protective screen “Lighting” between the lighting and
the conveyor unit.
Please note
Make sure that the glass surfaces are not scratched; do
not use abrasive cleaning agents. You will then avoid dam-
age which could lead to malfunctioning of the Checkbox.
First remove the camera cover.
1. Switch off the compressed air and the power supplies.
2. Loosen the four fastening screws on the bottom of the
camera cover.
3. Lift up the camera cover.
Cleaning the protective screen “Lighting”
It is not necessary to dismantle the protective screen
“Lighting” in order to clean it.
Clean the glass surface above the conveyor belt:
– with clean, non-lubricated compressed air,
– with a soft moist cloth and a non-abrasive cleaning agent.