Festo Checkbox Identbox, Manual

Page: 88 / 158

5. Teaching parts with the Checkbox
5-10
Festo P.BE-Checkbox-EN en 0103c
Scanning further orientations
A parts type is not registered completely until the camera has
recorded all the intended orientations.
1. Set the next orientation with the butttons TOLERANCE [+]
and [-].
2. Scanning the sample parts in the new orientation In order
to do this, repeat the steps described in section 5.2.2.
For the test to be reliable, the features ascertained from the
individual orientations must be clearly distinguishable from
each other.
S
Check whether there is at least one feature in which the
various orientations differ.
S
Make sure in particular that orientation 1 (nominal
orientation) differs clearly in at least one feature from all
the other orientations.