Festo Checkbox Identbox, Manual

Page: 94 / 158

6. Testing parts with the Checkbox
6-4
Festo P.BE-Checkbox-EN en 0103c
The LCD TOLERANCE then shows the current memory group
and the tolerance in per cent, e.g. memory group 1, tolerance
5 %. The current parts type remains selected.
6.1.2 Load the teach data
Select the memory group of the saved teach data as refe-
rence for the test procedure.
1. Press the buttons TOLERANCE [+] and [-] at the same time.
The LCD TOLERANCE shows the current memory group.
2. Select the desired memory group.
S
Increase value by 1: Press TOLERANCE [+] briefly.
S
Reduce value by 1: Press TOLERANCE [-] briefly.
The illuminous button TYPE SELECT is switched off. The con-
veyor belt remains at a stand.
Sortbox
When the memory group is selected, the relevant sorting
program is activated.
1. Quit the selection of the sorting program by pressing any
illuminous TYPE SELECT [...] button. The conveyor belt
starts again. The LCD TOLERANCE shows the selected
memory group and the tolerance in per cent.
2. Set further parameters or start with the test mode
(chapter 6.2).