Festo Checkbox Identbox, Manual

Page: 9 / 158

Contents and general instructions
VII
Festo P.BE-Checkbox-EN en 0103c
Designated use
The Checkbox has been designed for use in manual and in-
dustrial applications in enclosed work rooms under normal
operating conditions.
The Checkbox described in this manual is intended exclus-
ively for use as follows:
– for sorting and rejecting small conveyed parts such as
e.g. screws, springs, bolts.
– for contact-free checking of the position and quality of the
parts.
Use the Checkbox only as follows:
– in accordance with designated use
– in faultless technical condition
– without any modifications by the user.
No guarantee claims can be accepted if the device is opened.
The specified limits for pressure, temperature, electrical con-
nections etc. must be observed.
Please observe the standards specified in the relevant
chapters and comply with technical regulations, as well as
with national and local regulations.
Operating requirements
– The features of the conveyed part which determine the
orientation or quality must be recognizable and distin-
guishable for the Checkbox.
– It must be possible to integrate the conveyor unit in the
material flow.