Festo CECX-X-C1 Series, Manual

Page: 457 / 631

System manual CECX / Bus link module CECX-B-CO
CECX-C-2G1

4 SSI interfaces

possible errors: Sensor failure
For each CECX-C-2G1 the objects 0x5040, 0x5041, 0x5042, 0x5043 and
0x5045 are extended by 4 Sub-Indices. The object 0x5046, is extended by
one index.
Objects used:
0x5040 (Sample Offset)
0x5041 (Frame Configuration)
0x5042 (Value Mask)
0x5043 (Error Mask)
0x5045 (Value)
0x5046 (State)
For details about the objects used:
See chapter "K-Bus module-specific objects".
CECX-E-6E-T-P2

6 temperature inputs

possible errors: Sensor failure
For each CECX-E-6E-T-P2, the objects 0x5010, 0x5011 and 0x5014 are
extended by one Sub-Index. The object 0x6401, is extended by 6 Sub-
indices.
Objects used:
0x5010 (CECX-E-6E-T-P2 configuration)
0x5011 (CECX-E-6E-T-P2 PDO Status)
0x5014 (CECX-E-6E-T-P2 Temperature sensor configuration)
0x6401 (Read analog inputs).
For details about the objects used:
See chapter "K-Bus module-specific objects".
Functionality:
The CECX-E-6E-T-P2 has an internal measurement cycle of 100 ms. To
optimize the Bus load the measurement values of the individual channels
are transmitted one after another (1 value for each SYNC). For this the
temperature value in object 0x6401 is transmitted and the corresponding
channel number is transmitted in object 0x5011. The highest value Bit in
object 0x5011 signals whether an external terminal temperature sensor is
connected.
CECX-II 34-21