Festo CECX-X-C1 Series, Manual

Page: 120 / 631

System manual CECX / Diagnosis
CECX-II 9-2
9.3 Error codes
9.3.1 Startup error
Error
display
Cause Measure
1 – E 31
FPGA could not be loaded
(Missing or incorrect FPGA data
programmed in the OnBoard flash) Contact Festo
(Re-program FPGA data or have
hardware repaired)
3 – E 51
Firmware could not be loaded (no
Compact Flash available or no firm-
ware on the Compact Flash) Check whether a Compact Flash
with valid firmware is available and,
if necessary, restart Compact Flash.
9.3.2 Operating error
Error
display
Cause Measure
o – E 103
No 3S license or initialization error of
3S runtime system
Contact Festo
o – E 401
Error during starting of the IO sys-
tem
Check add-on modules
o – E 501
Error during writing of the status
report.
Contact Festo
o – E 701 Error message class 3
Remedy cause for error message
class 3 and confirm the error
o – E 901 No or invalid license information
A license update may be required.
Please contact your supplier.
o – E 902 Invalid license version
A license update may be required.
Please contact your supplier.
II – E 501
Error during writing of the status
report.
Contact Festo
II – E 701 Error message class 3
Remedy cause for error message
class 3 and confirm the error
O – E 501
Error during writing of the status
report.
Contact Festo