56
Maintenance
1
Fig. 35: Lubricating nipple guide Y-axis
1 Lubricating nipple
5.
Clean lubricating nipple.
6.
Place the pressure grease gun onto the nipple and pump 3 times.
🡆
A small amount of lubrication will come out of the seals.
7.
Repeat the process for both lubricating nipples.
8.
Switch machine on.
9.
Position the working head on the left and repeat the process.
10.
Move several times over the entire length of the axle to distribute the grease.
🡆
Guide is lubricated with a thin film of grease.
Summary of Contents for Hammer HNC3 825
Page 69: ......
