Fein WSB 8-115, Instruction Manual

Page: 16 / 176

16
WSB 8-115 / WSB 13-125
EN
For your safety.
Do not use this power tool before you
have thoroughly read and completely
understood this Instruction Manual and the
enclosed “General Safety Instructions” (docu-
ment number 3 41 30 054 06 1), including the
figures, specifications, safety regulations and the
signs indicating DANGER, WARNING and
CAUTION.
Please also observe the relevant national
industrial safety regulations (e. g. in Germany:
BGV A3, BGR 500).
Non-observance of the safety instructions in the
said documentation can lead to an electric shock,
burns and/or severe injuries.
This Instruction Manual and the enclosed “Gen-
eral Safety Instructions” should be kept for later
use and enclosed with the power tool, should it
be passed on or sold.
Special safety instructions.
Operations such as sanding or polishing are not
recommended to be performed with this power
tool.
Operations for which the power tool was
not designed may create a hazard and cause per-
sonal injury.
Do not rivet or screw any name-plates or signs
onto the power tool.
If the insulation is damaged,
protection against an electric shock will be inef-
fective. Adhesive labels are recommended.
Wear personal protective equipment. Depending
on the application, use face shield, safety goggles
or safety glasses. As appropriate, wear dust mask,
ear protection, gloves and shop apron capable of
protecting you against flying debris from the
accessory or work piece.
The eye protection
must be capable of protecting against flying par-
ticles generated by the various different opera-
tions. The dust mask or respirator must be
capable of filtering particles generated by your
operation. Prolonged exposure to high intensity
noise may cause loss of hearing.
CAUTION This sign warns of a possible dangerous situation
that could cause injury.
It is forbidden to dispose of
the product in the unsorted
household waste. Worn out power tools and other electrotechnical
and electrical products should be sorted sepa-
rately for environment-friendly recycling.
Protective class II Product with double or reinforced insulation
mm Millimeter Unit of measure for length, width, height or depth
kg Kilogram Unit of measure for the mass
V Volt Unit of measure for the electric voltage
A Ampere Unit of measure for the electric current intensity
Hz Cycles per second Unit of measure for the frequency
W Watt Unit of measure for the output
min Minutes Unit of measure for the time
~ or a. c. Current type Alternating current
or d. c. Current type Direct current
1 ~ Power supply type Alternating current single-phase
n
o
No-load speed Revolution speed at no-load
1/min per minute Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute
Ø
Diameter Diameter of a round part
3 41 01 048 06 4.book Seite 16 Donnerstag, 20. Juli 2006 2:18 14