![background image](http://html1.mh-extra.com/html/feig-electronic/ibid-i-scan-id-isc-mr200/ibid-i-scan-id-isc-mr200_manual_3869664095.webp)
OBID i-scan
®
System-Manual
ID ISC.MR200
FEIG ELECTRONIC GmbH
Page 95 of 144
H40801-5e-ID-B.doc
6.1.5. [0x24] Write Multiple Blocks
This command writes one or more data blocks.
The supported ISO15693Host commands depends on the different ISO15693Transponder types,
which are described in chapter
7.1.
)
Supported ISO15693 Host commands for ISO15693 Transpon-
ders
.
REQUEST-DATA
4
5
(6...13)
6 / (14)
7 / (15)
8 / (16)
9...n / (17...n)
0x24
MODE
UID
DB-ADR
DB-N
DB-SIZE
DB
Repeated DB-
N times
RESPONSE-DATA (STATUS = 0x03)
5
DB-ADR-E
RESPONSE-DATA (STATUS = 0x95)
5
6
ISO15693
ERROR
DB-ADR-E
MODE:
Bit:
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
ADR
ADR:
b000
non-addressed
b001
addressed
b010
selected
UID:
Read-only serial number of the Transponder. The UID is required only in the addressed
mode.
DB-ADR:
Address of the first data block to be written to the Transponder. First block can be any value
between 0 and 255.
DB-N:
Number of data blocks to be written to the Transponder, starting at DB-ADR.
The maximum number of DB-N, depend on DB-Size and the interface receiver buffer size
RX-BUF. The maximum number of DB-N is:
(RX-BUF - 20 )/(DB-Size) e.g. Block size 4 (DB-N = (280 – 20) / 4 = 65)
DB-SIZE:
Number of bytes of one data block. This value depend on the specification of the Trans-
ponder manufacturer, see chapter
7.1.
)
Supported ISO15693 Host commands for
ISO15693 Transponders
. DB-SIZE must be 1 for the I-CODE EPC Transponder.