![background image](http://html1.mh-extra.com/html/feig-electronic/ibid-i-scan-id-isc-mr200/ibid-i-scan-id-isc-mr200_manual_3869664068.webp)
OBID i-scan
®
System-Manual
ID ISC.MR200
FEIG ELECTRONIC GmbH
Page 68 of 144
H40801-5e-ID-B.doc
4.2. [0x81] Write Configuration
The configuration of the Reader can be changed by means of the Write Configuration command. In
order to do this, the configuration memory is written to with 14 bytes long blocks and addressed by
CFGn in the byte CFG-ADR. The description of parameters can be taken from Chapter
3. Configurati-
on Parameters (CFG)
Host
→
Reader
1
2
3
4
5...18
19-20
20
COM-ADR
[0x81]
CFG-ADR
CFG-REC
CRC16
Host
←
Reader
1
2
3
4
5-6
6
COM-ADR
[0x81]
STATUS
1
CRC16
CFG-ADR
2
:
Bit:
7
6
5
4
3
2
1
0
Function
LOC
0
CFGn: Address of Configuration Block
CFGn:
memory-address of the required configuration block
LOC:
specifies the location of the configuration block
b0
RAM
b1
RAM and EEPROM
CFG-REC:
14 bytes configuration block stored in the configuration memory of the Reader at
address CFGn.
Note:
A write configuration to EEPROM with reserved configuration blocks will cause an
0x16 error code.
1
see ANNEX D: Index of Status Bytes
2
see chapter 3. Configuration Parameters (CFG)