- 20 -
ITR Refrigerated Self Contained Models
Cabinet Preparation
The ITR Self Contained models have a large condenser compartment hanging from the bottom of case that
contains the condenser and condensate evaporator unit. This compartment hangs inside the cabinet
compartment. The interior of the cabinet must be open to allow space for this compartment.
Cabinet Cutout
The countertop must be cut to allow the case’s base and condenser compartment to drop into the cabinet
interior. Use the diagram below for cutout dimensions.
IMPORTANT: When placing cases in a line up the number of end panels used will be different. The cut
out and hole placement dimension will need to be adjusted for each particular line up circumstance. See
LINE UP INTALLATION section of this manual.
27.37
2.00" TO 3.5" REF FROM TOP
CUT OUT TO BACK OF DOOR
ITR 48" WIDE 45.5"
ITR 60" WIDE 57.5"
TOP CUT OUT
GRILL CUT OUTS
CL
FRONT
BACK
BACK
3.00 MAX
FROM TOP TO
DOOR CUT OUT
14.0
10.5
10.5
14.0
4.25 FROM TOP OF
COUNTER TO TOP OF
GRILL CUTOUT
6.7
6.7
GRILL CUT OUTS
L
BACK
3.00 MAX
FROM TOP TO
DOOR CUT OUT
9.6
10.5
4.25 FROM TOP OF
COUNTER TO TOP OF
GRILL CUTOUT
9.6
10.5
5.2
5.2
C
ITR 36" WIDE 33.5"
27.37
2.00" TO 3.5" REF FROM TOP
CUT OUT TO BACK OF DOOR
TOP CUT OUT
FRONT
BACK
CENTER TOP CUTOUT
WITH CENTER OF REAR DOORS
CENTER TOP CUTOUT
WITH CENTER OF REAR DOORS
