- 42 -
SERVICE
Service Information
Before any service work is performed
on the case, make sure all power is
disconnected to the case.
Service problems or request for repair parts from authorized service agencies, trained service personnel, or
owners should be referred to:
CUSTOMER SERVICE DEPARTMENT
Federal Industries
P.O. Box 290
Belleville, WI 53508
Toll Free: (800) 356-4206 / WI Phone (608) 424-3331
Fax: (608) 424-3234
Special Service Situations
There are rare occasions when the refrigerant charge must be evacuated from a case in order to
perform service work. In those situations, Federal Industries recommends that the refrigerant
charge be evacuated into a recovery system to prevent the possibility of hydrofluorocarbons
(HFC’s) from being released into the atmosphere.
If moisture or liquid is observed around or under a Federal Industries case, an immediate
investigation should be made by qualified personnel to determine the source of the moisture or
liquid. The investigation made should determine if the case is malfunctioning or if there is a simple
housekeeping problem.
NOTICE
:
Moisture or liquid around or under a case is a potential slip/fall hazard
for persons walking by or working in the general area of the case. Any
case malfunction or housekeeping problem that creates a slip/fall hazard
around or under a case should be corrected immediately.
CAUTION
RISK OF ELECTRIC SHOCK
DISCONNECT POWER
BEFORE SERVICING UNIT
